Introduction of 6063-T5 Aluminum led lighting profileThe composition of 6063 aluminum alloy contains 0.4%Si and 0.7%Mg, the strength of hard material is 295Mpa, and the strength of soft material is 111Mpa. . This LED track system channel can be installed in a variety of ways for LED lights in any situation. It is durable and can also act as an LED heatsink, extending the life of your LED strips....
Introduction of 6063-T5 Aluminum led lighting profile
The composition of 6063 aluminum alloy contains 0.4%Si and 0.7%Mg, the strength of hard material is 295Mpa, and the strength of soft material is 111Mpa. . This LED track system channel can be installed in a variety of ways for LED lights in any situation. It is durable and can also act as an LED heatsink, extending the life of your LED strips.
Specification of 6063-T5 Aluminum led lighting profile
Aluminum alloy： 6063-T5
Surface Treatment： Powder Coated, Anodized, etc.
Color： Black, Blue, White, Gold, Wood Grain, Customized
Standard： GB SGS
Temper： O-H112, T3-T8
Length： can be higher than 6m
Width/diameter： above 200mm
Height/diameter： higher than 200mm
Wall thickness： at least 0.5mm
Process Extrusion
|
Chemical Composition |
|||||||||||||
|
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Ga |
V |
Ti |
Other |
Min.Al |
|
6063 |
0.2-0.6 |
0.35 |
0.10 |
0.10 |
0.45-0.9 |
0.10 |
- |
0.25 |
- |
- |
0.10 |
0.15 |
Remainder |
|
Physical Property |
||||||
|
Alloy |
Temper |
Wall thickness /mm |
Room temperature Test Result |
|||
|
Tension Strength/MPa |
Yield Strength/MPa |
Elongation/% |
||||
|
A50mm |
A |
|||||
|
Not less than |
||||||
|
6063 |
O |
all |
≤130 |
- |
18 |
16 |
|
T1 |
≤12.50 |
115 |
60 |
12 |
10 |
|
|
>12.50~25.00 |
110 |
55 |
- |
10 |
||
|
T42 |
≤12.50 |
130 |
70 |
14 |
12 |
|
|
>12.50~25.00 |
125 |
60 |
- |
12 |
||
|
T4 |
≤12.50 |
130 |
70 |
14 |
12 |
|
|
>12.50~25.00 |
125 |
60 |
- |
12 |
||
|
T5 |
≤25.00 |
175 |
130 |
6 |
8 |
|
|
T52 |
≤25.00 |
150-205 |
110-170 |
8 |
7 |
|
|
T6 |
all |
205 |
170 |
10 |
9 |
|
|
T66 |
≤25.00 |
245 |
200 |
8 |
10 |
|
|
F |
all |
- |
- |
- |
- |
|
Features of 6063-T5 Aluminum led lighting profile
- This aluminum extrusion is designed for flexible LED strips and LED rigid strips.
- The heat dissipation effect of aluminum profiles is better.
- High-quality aluminum profiles make the soft strip more beautiful. Does not fade and rust.
- PMMA overlay: clear and diffused and milky overlay for solutions.
- Flush mount & Surface mount & Ceiling mount.
- Can be anodized or powder coated in any color according to RAL color card
- This aluminum profile is thinner and suitable for use with lighter lamp beads. It is recommended to use with 3014 lamps, which is easy to install.
